SPRING+
DOT 4
FULL SYNTHETIC
PRODUCT DESCRIPTION:
Petrocar Spring+ DOT 4 is a full synthetic brake fluid for modern brake systems. This product gives higher performance compared to the DOT 3 brake fluids. Petrocar Spring + DOT 4 shows the following features:
• High boiling point / low vapour pressure.
• Satisfactory viscosity over a wide temperature range.
• Appropriate fluidity at low temperatures.
• Good stability and properties retention.
• Adequate compatibility with rubber.
• Satisfactory lubrication performances.
• Good compatibility with the various metals in the brake system.
• Miscibility with other approved fluids of the same type.
The water tolerance is very important for the above product as a small amount of water in unavoidably picked up in service. The presence of water lowers the boiling point and increases the possibility of unsatisfactory brake performance due to vapour locking. Petrocar Spring+ DOT 4 continues to operate satisfactorily even with limited water contamination: its boiling point does not fall below 155 °C in wet conditions.
APPLICATIONS:
Petrocar Spring+ DOT 4 is suitable for use in passenger cars, motorcycles and commercial vehicles, particularly in disc, drum and anti-skid braking systems requiring DOT 3 or DOT 4 level performance. Petrocar Spring+ DOT 4 has a density higher than water. It is hygroscopic and therefore it must be preserved in closed containers.
PERFORMANCE LEVELS AND APPROVALS:
SAE J 1703 / J 1704
FMVSS 116, DOT 4
CUNA NC 956, DOT 4
ISO 4925 Class 3 / 4
FIAT 9.55597
NH 800 A
OPEL/GM 19 42 421
IVECO 18-1820
JIS K2233 Class 4
CAPACITY:
500ML